Other Related Information |
|
Base Length | 26 in. |
Base Width | |
Quill Hold Type | Lock Lever with Gib |
Quill Diameter | 3 in. |
Depth Stop Type | Threaded Rod with Positive Stop |
Column Diameter | |
Spindle Information |
|
Spindle Taper | MT#3 |
Spindle Travel | |
Dist From Spindle To Column | |
Dist From Spindle To Table | |
Dist From Spindle To Base | 50 in. |
Table Information |
|
Table Length | |
Table Width | |
Table Thickness | 2 in. |
Floor To Table Height | 18 - 43 in. |
Vertical Table Movement | Crank Handle Operate |
Table Swivel Around Column | 360 deg. |
Maximum Movement Of Work Table | 25 in. |
No. Of T Slots | 2 |
T Slot Width | 1/2 in. |
T Slot Length | |
Operation Information |
|
Swing | |
Drilling Capacity | |
No Of Spindle Speeds | Variable |
Range Of Spindle Speeds | 300 - 2000 RPM |
Drill Chuck Type | JT6 Key Chuck |
Drill Chuck Size | 1/2 in. |
End Milling Cap | 3/4 in. |
Face Milling Cap | 3 in. |
Other Specifications: |
|
ISO Factory | ISO 9001 |
Country Of Origin | Taiwan |
Warranty | 1 Year |
Serial Number Location | ID Label on Head Casting |
Assembly Time | 10 minutes |
Features:
Graduations in 0.001 Inches Manual Fine Down Feed Quill Lock and Depth Stop MT #3 Spindle Taper Variable Speed
Table and Base are Cast Iron
G9749 Variable Speed Drill Press |