Identification
A
B
C
D 
E
F
G
H
I 
K
J
L
Figure 1. Right side controls.
Refer to the list below and see Figures 1 & 2 to become familiar with the drill press controls.
A.Speed Selector Control: Allows variable speeds from 300 to 2000 RPM.
B.Depth Gauge: Indicates quill travel in centi- meters and inches.
C.Fine Downfeed Control: Allows more pre- cise management of the quill and tooling.
D.Depth Stop: Stops the quill travel at a pre-set drilling depth.
E.Fine Downfeed Indicator: Indicates fine downfeed adjustments in 0.001" increments.
Figure 2. Left side controls.
F.Clutch Knob: Switches between rapid and fine downfeed control.
G.Rapid Downfeed Control: Provides a faster movement of the quill and tooling.
H.Table Crank Handle: Raises/lowers the table.
I.Headstock Lock Levers: Locks the head- stock rotation.
J.Table Lock Lever: Locks the table height and rotation.
K.Quill Lock Lever: Locks the quill in place.
L.Rotary Power Switch: Selects forward, stop, or reverse.
G9749 Variable Speed Drill Press |
