5 Programming

5.1Preparation

Connect the test receiver to the HF output or the test output of the head-end station.

Set the output channel / output frequency of the cassette (see page 20) and adjust the TV test receiver to this channel.

Switch on the modulator if necessary.

Balance the output levels of the channel strips “A” and “B” if the difference in level is ≥ 1 dB (see chapter “Modulator settings”, page 19).

Measure the output levels of the analogue cassettes and tune them to a uni- form output level using the appropriate level controls 2 (s. page 7).

5.2Notes on the following programming procedure

The parameters to be set are underlined (cursor).

Connection C : Time-controlled channel selection

Connection D : Decoding 2 stations with one CA module