1 Safety regulations

Warning

•Assembly, installation and servicing should be carried out by authorised electricians.

•Switch off the operating voltage of the system before beginning with assembly or service work or pull out the mains plug.

•Do not perform installation and service work during thunderstorms.

•Install the system so it will not be able to vibrate…

-in a dust-free, dry environment

-in such a manner that it is protected from moisture, fumes, splashing water and dampness

-somewhere protected from direct sunlight

-not within the immediate vicinity of heat sources

-in an ambient temperature of -20 °C to +50 °C.

•Ensure that the head-end station is adequately ventilated. Do not cover the ventilation slots.

•Beware of short circuits

•No liability is accepted for any damage caused by faulty connections or inap- propriate handling.

•Observe the relevant standards, regulations and guidelines on the installation and operation of antenna systems.

•Earth the SAT receiver in accordance with DIN EN 50083-1 / EN 60728-11 and VDE 0855 (earthed, equipotential bonding rail).

Take action to prevent static discharge when working on the device.

2 General information

2.1 Packing contents

1 cassette HDM 2370 P CI

2 HF cables

1 CD (assembly instructions)

1 Brief assembly instructions