2.5Software query

Control unit

If necessary, you can activate the indication of the software version of the con- trol unit manually:

•Press any two keys on the control unit of the head-end station simultaneously until the display goes dark and the software version, e.g. “V 37” appears.

3 Assembly

3.1 Installing the cassette

Caution

– Ensure the head-end station is mounted so it will not be able to vibrate. Avoid, for example, mounting the head-end station onto a lift shaft or any other wall or floor construction that vibrates in a similar way.

–Before installing or changing a cassette unplug the power cable from the mains power socket.

•Remove the fastening screws 1 of an unoccupied slot from the bracket of the head-end station.

•Insert the cassette in this slot and push it into the housing.

•Align the cassette and apply slight pressure to connect it to the connections of the board and the HF bus bar.

•Fasten the cassette with the 1 screws.



C101

L104

L100

L101

L103

C100

LNC- BREITBA

+18V +24

ROT GRUEN +18V

Anschl.



INPUT

OUTPUT

OUTPUT

INPUT