Setting the fine-tuning
Only change the fine-tuning in exceptional circumstances, since once you change it, all connected television sets of the cable system must be adjusted to match it by means of corresponding fine-tuning corrections.
• Press the ▶ button.
—> “FINE 0” appears in the display.
• Set the fine-tuning using the | buttons. |
•Press ◀ to return to the main menu. Settings for TV stations
•Press the 
button
—> The “Automatic picture format conversion” – “VIDEO-OUT:” menu is activated (chapter 5.4.1.2, page 29).
•Press the 
button.
—> The “Setting the LNB oscillator frequency” – “LNB-FREQ:” menu is activated.
Setting the LNB oscillator frequency
Set the oscillator frequency of the LNB used in this menu.
◀ / ▶ Bx 4A LNB-FREQ: f= 10600 MHz
Module Hauptmenü
•Use ◀ / ▶ to position the cursor under the digit of the frequency displayed to be set.
• Press | to enter the oscillator frequency of the LNB |
used. | |
