The operating software of the cassette can be updated via the
The cassette is equipped with a common interface. It allows you to connect a CA module for various encryption systems and service providers. Encoded channels can only be decoded with a CA module suitable for the encoding system and the corresponding smart card. The smart card contains all the infor- mation for authorisation, decoding and subscription.
Caution– Check with the distributor or manufacturer of the CA module to be used to ensure that it is suitable for decoding 2 channels.
–The hardware and software of this cassette have been thoroughly pre- pared and tested.
–Any changes made by program vendors to the structures in the program data might impair or even prevent this function.
–When working with the CA module, please read the corresponding op- erating manual from the respective provider.
•Insert the smart card into the CA module so that the chip on the smart card faces the thicker side (top) of the CA module.
•Insert the CA module into the slot 3 (s. chap. 3.3) with the top side of the CA module facing the top side of the cassette.
•Push the CA module without canting into the guide rails of the common inter- face slot and contact it to the common interface.
•To take out the CA module press the eject button 4.