Setting the audio mode

In this menu you can define whether the Mono, Stereo or Dual Tone signal from the MPEG data stream or the VPS Signaling (if available) is to be used.

Bx 4A AUDIO-OUT:

MPEG => Audiomode MPEG / VPS

• Press

 

to switch over the data stream

(“MPEG” / “VPS”).

• Press the

button.

—>

The “Setting the LNB oscillator frequency“ –

 

“LNB-FREQ:” menu is activated (page 21).

5.4.1.3Configuring the CA module

This setting supports a menu, which is displayed on the television screen. This menu is dependent on the CA module used. Please observe the operating instructions of the CA module used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bx 4A

MENU 1/6

 

 

 

 

Bx 4A

 

 

 

◀

/

 

▶

 

 

 

 

 

 

INPUT:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

 

 

 

 

 

 

 

SR= 2750

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Module Hauptmenü

–> Information Smartkarte Jugendschutz Einstellungen Zurück

Bitte wählen Sie mit OK

AlphaCrypt Light 1.01 (c) Mascom GmbH

TV-Bild

◀ / ▶

TV picture

•Press to select the menu item on the screen.

•Activate menu item with ▶ .

•Select the required function with the buttons.

•Save the settings with the M button.

—> To return to the “Setting the input symbol rate“ –

“INPUT:“ menu, press the button.

• Press the button.

—> The “Setting the input frequency” – “FREQ.-IN:” menu is activated (page 22).