Grundig HDM 2370 P CI 35

Modulator operating mode —> Setting see page 19.

Setting the TV standard of the output signal —> Setting see page 20.

Bx 4B

OUTPUT:

S09

* * )

Setting the LNB oscillator frequency

The LNB oscillator frequency is not to be set if decoding is activated.

Contents

English Contents Page 1 Safety regulations 2 General information Page Connections SAT inputs A and B: F sockets HF output (modulators): IEC socket 3 Assembly Page Notes: 3Slot for CA module 4Eject button for CA module 5 Socket “RS 232” 3.4Retrofitting a CA module 4 The control panel at a glance 5 Programming 5.3 Programming procedure Page Page 5.3.1Decoding 2 stations with one CA module (channel strip “B”) 5.3.2 Time controlled switching Page Page •By pressing , select channel strip “A” / “B” or “a” / “b” Setting time-controlled,alternative channels • By pressing , call up channel strip “B” • Press Page Page —>The “Setting the input symbol rate” – “INPUT: ”and e.g. “SR=27500” menu is activated Setting the input symbol rate •Press to enter the values of the symbol rate. Configuring the CA module —>The “Setting the input frequency” – “FREQ-IN:”menu is activated Page Page Page Page Page Page Page Page Page Page Page Page Page Switching on decoding / Setting the input symbol rate —>The display shows “INPUT:” “CI at LINE A” Switch off decoding Page Page 6 Channel and frequency tables