• Press the button.

—> The “Setting the input symbol rate” –“INPUT: ”and e.g. “SR=27500” menu is activated.Setting the input symbol rate

The symbol rates of the satellite transponders can be found in the current channel table of the satellite operator, in various satellite magazines and in the Internet.

 

/

 

 

Bx 4A

INPUT:

 

 

 

 

 

 

 

 

▶

 

 

 

◀

 

 

 

 

 

 

 

 

 

Bx 4A

 

MENU 1/6

 

 

 

 

SR= 27500

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Module Hauptmenü

–> Information Smartkarte Jugendschutz Einstellungen Zurück

Bitte wählen Sie mit OK

AlphaCrypt Light 1.01 (c) Mascom GmbH

TV-Bild

◀ / ▶

TV picture

•Use ◀ / ▶ to position the cursor under the digit of the symbol rate displayed to be set.

•Press to enter the values of the symbol rate. Configuring the CA module

•Press the button

—> The “Configuring the CA module” – “MENU:” menu is activated (chapter 5.4.1.3, page 33).

•Press the button.

—> The “Setting the input frequency” – “FREQ-IN:” menu is activated.Setting the input frequency

If three dots “ … “ appear in the second line of the display, the cassette is in the “station search” mode. Please wait until the process has finished.

Once the HF receiver has synchronised to the input signal, any offset to the target frequency is displayed in MHz, e.g. “– 1.8”.

If a question mark “?” appears in the second line of the dis- play, there is no input signal present. Check the configuration