Hague Quality Water Intl 60 SERIES manual Six-Button Controller, Controller Part Function

Six-Button Controller, Cont.

Controller Part	Function
LCD Display	Shows the status of the controller
Normal Operating	Shows
Mode	￿ The amount of soft water remaining until the next automatic regeneration (Each person in
	the household uses about 75 gallons per day)
	￿ The number of days until the next regeneration (Mode 1)
	￿ The current day and time and the flow rate in gallons (or liters) per minute
	￿ The time of the next scheduled regeneration (If the Regenerate button has been pressed
	and released)
Customer Setting	Includes setting the time of day, the regeneration time, and the number of people in the household;
Mode	depending on the service settings, this option may not be available
Service Settings	Includes settings such as the language, mode, water hardness, and time of each regeneration
Mode	step. Service Settings must be set before Customer Settings. Otherwise, some values may not be
	available. Intended for use by qualified service personnel
Water Flowing	Indicates that water is flowing through the appliance; useful for checking for proper plumbing and
Indicator	leaks
Recharge/	Shows regeneration cycle positions during regeneration
Regeneration
Status
Scroll Back Button	Steps back to a previous parameter setting without the need to scroll forward through all settings
Change Digit	Used with the Select Digit button to set the value of certain parameters.
Button	Pressing the Change Digit button changes the value under the cursor to the next available value,
	typically increasing by one until all values have been displayed and the process begins again
Select Digit Button	Moves the cursor when setting parameters
	1. Press and release the Select Digit button to move the cursor one digit to the right of the
	parameter to be changed
	2. When the cursor is at the extreme right position, press the Select Digit button again to
	reset the cursor to the extreme left position
Service Settings	Enters the Service Setting programming mode—for use by Hague dealer. See Service Settings
Button
Regenerate Button	Used to start an immediate regeneration
Customer	Enters the Customer Setting programming mode. See Customer Settings
Settings/Next
Button

WaterMax 60 Series Owner’s Manual 11/10/2008 6