Service Settings, Cont.
Mode 1 (Timer Mode) Setting Chart
This section provides guidance for using different service settings to achieve the desired capacity.
60 Series | 63MAQ1 | 63BEQ1,2 | 63MXQ1 | 63MDQ | 62AMQ1 | 62APQ1,3,4 | 62AKQ | 62AJQ5 | |
Mode 1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
Regeneration Frequency | As | As | As | 1 or 2 | As | 1 or 2 | 1 or 2 | 1 or 2 | |
required | required | required | days | required | days | days | days | ||
| |||||||||
96 hour regeneration | — | — | Yes | — | Yes | — | — | — | |
(if iron | |||||||||
|
|
|
|
|
|
|
| ||
#1 Salt Setting |
|
|
|
|
|
|
|
| |
Backwash 1 (minutes) | 1 | 1 | 16 | — | 26 | — | — | — | |
Brine/Rinse (minutes) | 7 | 7 | 7 | — | 7 | — | — | — | |
Backwash 2 (minutes) | 3 | 3 | 3 | — | 2 | — | — | — | |
Capacity (grains) @ | 5,900 @ | 5,900 @ | 8,400 @ | — | 5,200 @ | — | — | — | |
salt (lb) | 1.1 lb | 1.1 lb | 1.6 lb | 1 lb | |||||
|
|
|
| ||||||
#2 Salt Setting |
|
|
|
|
|
|
|
| |
Backwash 1 (minutes) | 1 | 1 | 16 | — | 26 | — | — | 76 | |
Brine/Rinse (minutes) | 12 | 12 | 19 | — | 12 | — | — | 12 | |
Backwash 2 (minutes) | 3 | 3 | 3 | — | 2 | — | — | 2 | |
Capacity (grains) @ | 16,300 @ | 16,300 @ | 20,000 @ | — | 11,900 @ | — | — | 11,900 @ | |
salt (lb) | 3.2 lb | 3.2 lb | 4.2 lb | 2.7 lb | 2.7 lb | ||||
|
|
| |||||||
#3 Salt Setting |
|
|
|
|
|
|
|
| |
Backwash 1 (minutes) | 1 | 1 | 17 | 1 | 27 | 7 | 7 | 7 | |
Brine/Rinse (minutes) | 30 | 30 | 47 | 38 | 30 | 30 | 30 | 30 | |
Backwash 2 (minutes) | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | |
Capacity (grains) @ | 26,700 @ | 26,700 @ | 38,700 @ | 23,100 @ | 23,100 @ | 23,100 @ | 23,100 @ | 23,100 @ | |
salt (lb) | 6.2 lb | 6.2 lb | 9.6 lb | 8.5 lb | 6.2 lb | 6.2 lb | 6.2 lb | 6.2 lb | |
#4 Salt Setting8 |
|
|
|
|
|
|
|
| |
Backwash 1 (minutes) | 1 | 1 | 17 | 1 | 47 | 7 | 7 | 7 | |
Brine/Rinse (minutes) | 45 | 45 | 60 | 45 | 45 | 45 | 45 | 45 | |
Backwash 2 (minutes) | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | |
Capacity (grains) @ | 32,500 @ | 32,500 @ | 49,300 @ | 30,300 @ | 30,000@ | 29,800 @ | 30,300 @ | 30,300 @ | |
salt (lb) | 9.5 lb | 9.5 lb | 14.4 lb | 10.7 lb | 9.3 lb | 9.3 lb | 9.3 lb | 9.3 lb |
1Models 63MAQ, 63BEQ, 63MXQ, 62AMQ and 62APQ are certified by WQA. All other models are not tested or certified by WQA.
2Municipally supplied chlorinated water only.
3Must have a minimum of 2 ppm iron and a minimum of 200 ppm TDS. See Specifications.
4Model has no backwash flow control button or retainer. Must have a minimum of 7 gpm @ 30 psi available for proper backwash.
5Calcite will add additional hardness to water before softening.
6If iron is present in water supply, use salt setting #3 or #4.
7If iron is present in the water supply, set Backwash 1 to 7 minutes.
8Do not use this salt setting in California.
WaterMax 60 Series Owner’s Manual | 11/10/2008 | 19 |
