2
1
1
YPb Pr LR
L L
R R
VIDEO
VIDEO
S-VIDEO
S-VIDEO
VGA
VGAAUDIO
VGAAUDIO
AUDIO AUDIO
L
R
DVIAUDIO
DVIAUDIO
AUDIO
AUDIO
2
LR
AUDIO
AUDIO
COMPONENTIN
COMPONENTIN
VIDEOIN
VIDEOIN
1
AVOUT
AVOUT
VGAIN
HDMIIN
HDMIIN
ANTIN
ANTIN
OPTICALOUT
OPTICALOUT
Installation
10 TV LCD-TFT
Connecting a VCR
NOTE:All cables shown are not included with the TV.
There are several ways to connect your television,
depending on the components you want to connect and
the quality of the signal you want to achieve. The
following are examples of some different ways to connect
your TV with different input sources.
External Equipment Connections
Choose Your Connection
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you connect a S-VIDEO output from VCR to the
S-VIDEO input, the picture quality is improved;
compared to connecting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner`s manual.)
3. Select the input source with using the
INPUTbutton on the remote control, and
then press / button to select the source,
pressENTER button to confirm.