Haier HW24WF10NG Installing Your Wine Cellar, Unpacking Your Wine Cellar, Proper Air Circulation

Models: HW42WF10NG HW24WF10NG

1 44
Download 44 pages 29.31 Kb
Page 6
Image 6
Installing Your Wine Cellar

English

Installing Your Wine Cellar

Unpacking Your Wine Cellar

1.Remove all packaging material. This includes the foam base and all adhesive tape holding the wine cellar accessories inside and outside.

2.Inspect and remove any remains of packing, tape or printed materials before powering on the wine cellar.

Leveling Your Wine Cellar

Your wine cellar has two leveling legs which are located in the front corners of your wine cellar. After properly placing your wine cellar in its final position, you can level your wine cellar.

Leveling legs can be adjusted by turning them clockwise to raise your wine cellar or by turning them counterclockwise to lower

your wine cellar. The wine cellar door will close easier when the leveling legs are extended.

Proper Air Circulation

To assure your wine cellar works at the maximum efficiency it was designed for, you should install it in a location where there

is proper air circulation, plumbing and electrical connections.

The following are recommended clearances around the wine cellar: Sides……………2 "(50mm)

Top....................2" (50mm) Back..................2" (50mm)

Do not over fill your wine cellar for proper internal air circulation.

5

Page 6
Image 6
Haier HW24WF10NG, HW42WF10NG Installing Your Wine Cellar, Unpacking Your Wine Cellar, Leveling Your Wine Cellar, English