Haier HW42WF10NG Electrical Requirement, Install Limitations, Use of Extension Cord, English

Models: HW42WF10NG HW24WF10NG

1 44
Download 44 pages 29.31 Kb
Page 7
Image 7
Electrical Requirement

English

Electrical Requirement

Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with proper grounding to power the wine cellar.

Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet. This is a dangerous practice since it provides no effective grounding for the wine cellar and may result in shock hazard.

Install Limitations

Do not install your wine cellar in any location not properly insulated or heated e.g. garage etc. Your wine cellar was not designed to operate in temperature settings below 55˚ Fahrenheit.

Select a suitable location for the wine cellar on a hard even surface away from direct sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with the leveling legs located on the front and rear bottom corners of the wine cellar.

Your wine cellar is designed for free-standing installation only. It is not designed for built-in application.

Use of Extension Cord

Avoid the use of an extension cord because of potential safety hazards under certain conditions. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot outlet that will accept the plug. The marked rating of the extension cord must be equal to or greater than the electrical rating of the appliance.

6

Page 7
Image 7
Haier HW42WF10NG, HW24WF10NG user manual Electrical Requirement, Install Limitations, Use of Extension Cord, English