Hampton Direct U32 Conversion KIT #514-969 from NG to LP, For P36D-1 / P36-4 Only

INSTALLATION

CONVERSION KIT #514-969 FROM NG TO LP

for P36D-1 / P36-4 / U32-5 / U37-1 using SIT 820 NOVA Gas Valve

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER

IF IN DOUBT DO NOT DO THIS CONVERSION !!

Each Kit contains one LPG Conversion Kit and one DC Sparker Kit.

Conversion Kit Contains:

For P36D-1 / P36-4 Only:	6) Pull off the pilot cap to expose the pilot
	orifice.

5)Remove the 2 screws holding the Burner Assembly to the firebox base. Push the Burner Assembly to the left and lift out.

Qty.	Part #	Description
1	904-390	Burner Orifice #52
1	904-529	5/32" Allen Key
1	918-590	Decal "Converted
		to LPG"
1	908-528	Red "LPG" label
1	910-037	LPG Injector
		(Pilot Orifice)
1	918-481	Instruction Sheet
DC Sparker Kit Contains:
Qty.	Part #	Description
1	820-475	Bracket DC Sparker
1	820-476	Bracket DC Sparker
1	904-153	Washer #8 External Star

1904-330 Nut 8-32 Hex

2904-531 Bushing Split Plastic

0.500 in.

1904-543 Screw 8-32 x 3/4 Pan Head

2904-553 Screw #8 x 1/2 Type "B",

Black Oxide

1	910-073	Spark Generator Battery
		Holder

1910-074 Spark Generator Switch C/W Wire

1	910-078	Battery Size AA
		Energizer En91
2	910-199	Clip Wire Holder
1	910-903	Wire Fan To Power Cord
		Ground 30 in.
	904-781	Velcro Hook, Black
	904-782	Velcro Hook, Black

Installation of LPG

Conversion Kit:

1)Shut off the gas supply.

2)Remove the louvers (and bay door if it is installed).

3)Open the flush door and remove the door.

4)Remove the logs and embers (if already installed).

Remove the 2 screws, push Burner Assembly

to the left and lift out.

For U32-5 Only:

5a) Remove the grate by removing the screws on each side of the grate.

Remove the 2 screws

holding the grate in position.

5b) Remove the Burner Tray by removing the screws on each side of the tray. Push the tray to the left and lift up.

Remove the 2 screws,

push Burner Tray to the left, and lift off.

IMPORTANT

Before re-installation of the burner (once the LP conversion is complete), the air deflector must be installed. See step 18a.

7)Unscrew the pilot orifice with the allen key; then replace with the LPG pilot orifice and the pilot cap, provided in the kit.

8)Remove burner orifice with a 1/2" wrench. Use another wrench to hold on to the elbow behind the orifice. Discard orifice.

Burner Orifi ce

U32-5 FPI Direct Vent Gas Insert 17