INSTALLATION

Diagram 3

Note: A noncombustible mantel may be installed at a lower height if the framing is made of metal studs covered with a noncombustible board.

VENTING

THE APPLIANCE MUST NOT BE

CONNECTED TO A

CHIMNEY FLUE SERVING A

SEPARATE SOLID FUEL

BURNING APPLIANCE.

This appliance is designed to be attached to two 3" (76mm) co-linear aluminium fl ex running the full length of the chimney. The fl ue length must be a minimum length of 8 ' (2.44m) and a maximum of 35' (10.7m). See chart below for minimum distances from roof. Periodically check that the vent is unrestricted.

Masonry chimneys may take various contours which the fl exible liner will accommodate. However, keep the flexible liner as straight as possible, avoid unnecessary bending.

TheAir Intake pipe must be attached to the inlet air collar of the termination cap.

Part #

Description

948-305

3" Flex - 35 ft.

946-529

Co-linear DV Vertical

 

Termination Cap

The Air Intake pipe must be attached to the inlet air collar of the termination cap.

FLUE LINER

INSTALLATION

1)Cut the fl ex liner as required.

2)Mark the end of one liner to indicate Inlet.

3)Connect the other end of the above liner to the inlet side of the termination adaptor, seal connection with high temperature silicone. Secure with gear clamp.

4)Connect the 2nd liner to the exhaust side of the adaptor, seal connection with high temperature silicone. Secure with gear clamp.

GAS CONNECTION

GAS CONNECTION WARNING: Only persons licensed to work with gas piping may make the necessary gas connections to this appliance.

1)If the appliance is to be installed into an existing chimney system, thoroughly clean the masonry or factory built fi replace.

2)Theapplianceisprovidedwithanopeningon thelefthandsideofthecontrolcompartment. A3/8" NPT gas supply pipe must be brought near this inlet hole.

3)Locate the center point where the vent will pass through the chimney above the appliance. Move the appliance into the exact location where it is to be installed. Ensure that the Insert is level.

Alternate Approved Caps

980

Vertical Termination Cap

991

High Wind Cap

923GK

3" Co-linear Adaptor with fl ashing

In areas of consistently high winds, we recommend using the Simpson Dura-Vent System (923GK adapter and 991 high-wind cap).

5)Install fl ashing.

6)Insert both liners into chimney, passing through the damper opening.

7)Install termination cap.

8)Connect the marked end of the liner to the inlet collar of the vent connector plate marked with an "I", seal connection with high temperature silicone. Secure with gear clamp.

8

U32-5 FPI Direct Vent Gas Insert

Page 7 Page 9
Page 8
Image 8
Hampton Direct U32 installation manual Venting, Flue Liner Installation, GAS Connection
Page 7 Page 9

U32 specifications

Hampton Direct U32 is a versatile and innovative product designed to enhance everyday living. This device serves as an all-in-one solution, combining functionality, convenience, and modern technology to meet the needs of today's consumers.

One of the standout features of the Hampton Direct U32 is its user-friendly interface. The device comes equipped with a high-resolution touchscreen display, allowing users to navigate through various functions effortlessly. This intuitive design ensures that individuals of all ages can operate the U32 without frustration or difficulty.

The U32 also boasts a range of connectivity options, including Bluetooth and Wi-Fi capabilities. This enables users to connect the device to their smartphones, smart home systems, or other peripherals, making it a seamless addition to any tech-savvy lifestyle. With the ability to sync with mobile applications, users can access a broad range of features, from remote control functions to personalized settings tailored to their preferences.

In addition to connectivity, the Hampton Direct U32 incorporates advanced technology such as voice recognition. This feature allows users to control the device hands-free, enhancing convenience and providing an intuitive experience. The voice command functionality can access various features, further simplifying routine tasks and fostering a more connected environment.

Moreover, the U32 is designed with energy efficiency in mind. Utilizing modern energy-saving technologies, this device minimizes power consumption while delivering reliable performance. It is not just about functionality; the U32 is built to be eco-friendly, appealing to environmentally conscious consumers who wish to reduce their carbon footprint.

Another remarkable characteristic of the Hampton Direct U32 is its durability. Constructed from high-quality materials, the device is designed to withstand daily wear and tear while maintaining optimal performance. This robustness ensures that users can rely on the U32 long-term, making it a worthwhile investment.

Overall, the Hampton Direct U32 stands out as a multifunctional device that combines cutting-edge technology, user-friendly design, and energy efficiency. It successfully addresses the demands of modern living by offering robust features that cater to convenience, connectivity, and sustainability, making it an essential tool for households looking to simplify and enhance their daily routines.
Top Page Image Contents