Using the Modem

If your Dolphin 7400 is equipped with the optional integrated modem, you can allow communications via an analog phone line for dial-up applications. A phone jack is built into the back of the Dolphin 7400. The optional integrated modem is not available on the Dolphin 7450 terminal.

CAUTION: Only connect the modem to an analog phone line. Connecting to a digital PBX phone line could result in damage to the modem.

Phone Jack

Phone Jack on rear of Dolphin 7400

To communicate via the modem, remove the rubber plug from the phone jack and connect the analog phone line. Note: The

rubber plug should be inserted in the phone jack when it is not in use to protect the integrity of the connector.

If you have not already configured the modem, refer to Configuring the Modem in Chapter 2.

To make a connection:

1.From the Control Panel, select Start>Programs>Communication>Remote Networking.

2.Enter your User Name and Password.

3.Touch Dial Properties and select Tone Dialing. Note: Check Dialing Patterns and edit, if necessary, i.e., if 9 or the area code must be dialed with local calls.

4.Touch Connect.

4 - 8

Page 44
Image 44
Hand Held Products Dolphin 7400, Dolphin 7450 manual Using the Modem