Assembly Drawing | Harbor Freight Tools 38123 manual

ASSEMBLY DRAWING

illustration purposes only,	as replacement parts.
NOTE: listed and shown for	available individually
Some parts are	and are not

SKU 38123

For technical questions, please call 1-800-444-3353.

Page 20

Image 20

Harbor Freight Tools 38123 operating instructions Assembly Drawing

Contents

For technical questions and replacement parts, please call 38123 Specifications General Safety RulesSave this Manual Work Area Electrical Safety Personal Safety Tool USE and Care ServiceSpecific Safety Rules Industrial applications must follow Osha requirements Grounding Grounded Tools Tools with Three Prong Plugs Double Insulated Tools Tools with TWO Prong Plugs Extension Cords Symbology See Figure C Assembly Instructions To Secure The Sander Base Assembly To a WorkbenchTo Mount The Table Assembly Unpacking Figure F To Install The Backstop To Adjust The Worktable For Vertical SandingOperating Instructions See Figure G SKU For technical questions, please call See Figure J To Level The Worktable AssemblySee Figure To Install And Adjust The Sanding Belt See Figure K ON/OFF Locking Switch Sanding Methods Surface Sanding On The Sanding Belt Sanding Methods End Sanding On The Sanding Belt Sanding Methods Sanding Curved Edges Troubleshooting Symptom Probable Cause Remedy INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentTo replace the timing Drive Belt See Figure Q, next Please Read the Following Carefully See Figure Q Parts List Assembly Drawing