Page 7For technical questions, please call 1-800-444-3353.SKU 67596
allow the engine to completely b.
cool.
then, remove the spark plug c.
wire(s) from the spark plug(s).
Keep all safety guards in place and 2.
in proper working order. Safety
guards include mufer, air cleaner,
mechanical guards, and heat shields,
among other guards.
do not alter or adjust any part of 3.
the equipment or its engine that
is sealed by the manufacturer
or distributor. Only a qualied
service technician may adjust
parts that may increase or
decrease governed engine speed.
Wear ANSI-approved safety goggles, 4.
heavy-duty work gloves, and dust
mask/respirator during use and
service.
Keep the high pressure hose 5.
connected to the pressure washer
and spray Gun while the system
is pressurized. Disconnecting the
pressure hose while the unit is
pressurized is dangerous, and may
cause injury.
Do not allow the high pressure hose 6.
to come in contact with any hot
part of the unit. The hose might be
damaged, possibly causing it to burst
or leak under high pressure.
Maintain labels and nameplates 7.
on the equipment. These carry
important information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
If water is leaking out of the Pressure 8.
Washer immediately turn off the
unit. Unplug the Pressure Washer,
and discharge all pressure before
tightening ttings or having repair
work done by a qualied technician.
When the engine is running, do not 9.
allow the Pressure Washer to remain
idle for more than two minutes. If
allowed to remain idle, the water in
the unit will heat up, possibly causing
damage to the Pressure Washer.
Have the equipment serviced by a 10.
qualied repair person using only
identical replacement parts. This
will ensure that the safety of the
equipment is maintained. Do not
attempt any service or maintenance
procedures not explained in this
manual or any procedures that you
are uncertain about your ability to
perform safely or correctly.
Store equipment out of the reach of 11.
children.
Follow scheduled engine and 12.
equipment maintenance.
refueling:
Do not smoke, or allow sparks, 1.
ames, or other sources of ignition
around the equipment, especially
when refuelling.
Do not rell the fuel tank while the 2.
engine is running or hot.
Do not ll fuel tank to the top. Leave 3.
a little room for the fuel to expand as
needed.
Refuel in a well-ventilated area only.4.
save tHese instructiOns.