Harbor Freight Tools 67596 manual Basic Specifications, Unpacking, Set Up Instructions

Basic Specifications

	Type	89+ octane unleaded
Fuel		gasoline
	Capacity	0.95 Gallons
	Type	10W-30 above 32° F
Engine Oil	(SAE)	5W-30 at 32° F or below
	Capacity	0.63 Quarts
Pump Oil		3.75 fl-oz SAE 10W-30
		Non-detergent
Engine Speed		3,600 RPM
Water Flow		3 GPM Maximum
Maximum Pressure		2,500 PSI

Note: Additional specifications found in the Technical Engine Specifications chart in this manual.

The emission control system for this Generator’s Engine is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (also known as CARB). For warranty information, refer to the last pages of this manual.

At high altitudes, the engine’s carburetor, governor (if so equipped), and any other parts that control the fuel-air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product.

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

Set Up Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

WARNING Risk of accidental starting; resulting

in serious personal injury. Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and unplug the spark plug wire(s) before assembling or making any adjustments to the equipment.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Page 8 For technical questions, please call 1-800-444-3353. SKU 67596