Assembly

1.This equipment has a spark arresting muffler included. A spark arresting muffler is required by law in California, on some US Forest Service land, and possibly in other areas or situations.

Dipstick (60A)

Aluminum Pump

Breather Plug

(59A)

Brass Pump

Plug (14A)

Figure 1

2.Replace the Brass Pump Plug (14A) with the aluminum Pump Breather Plug (59A) and Dipstick (60A) before first use. The Pump Breather Plug must be used whenever the pressure washer is used. The Brass Pump Plug (without the breather hole) should be used for transporting only.

3.Attach the Handle (14) onto the Frame (17) with the Handle Bolts (15) and Nuts (16).

Detergent Inlet

Pressure Regulator

Connection (26A)

Knob (44A)

Hose

Water

 

 

 

Inlet

 

 

Connection

Connection

Figure 2

4.Attach the Hose (18) to the Hose Connection on the unit. (See Figure 2.)

5.Pull the Collar at the end of the hose back and attach the Gun (19) to the hose.

6.Screw the Wand (20) onto the Gun and secure with the grommet.

7.Choose the right Nozzle (5) for the job. Pull back the quick connect collar and push the Nozzle onto the end of the Wand. Make sure the quick connect collar locks the Nozzle in place.

Black Nozzle -

Low Pressure

This Nozzle is used with pressure washer detergent.

White Nozzle -

Wide Spray

This Nozzle can be used to clean very large areas.

Green Nozzle -

Medium Spray

This Nozzle can be used to clean larger areas.

SKU 67596

For technical questions, please call 1-800-444-3353.

Page 9

Page 9
Image 9
Harbor Freight Tools 67596 manual Assembly, Low Pressure, Wide Spray, Medium Spray