Harbor Freight Tools 95668 See Figure P, Fence Alignment, 57, 59. See Figure Q

shaping tasks. The Fences (60) can be set at different positions to remove material from the entire edge of the wood stock or set at the same position to shape part of the edge.

2.Loosen the Lock Handle (61). (See Figure P.)

3.Adjust the position of the Fence (60) by turning the Knob (64). (See Figure P.)

4.Once the Fence (60) is in the desired position, re-tighten the Lock Handle (61).

(See Figure P.)

FIGURE P	FENCE
FENCE	(60)
(60)

LOCK HANDLE

(61)

KNOB

(64)

Fence Alignment:

1.To align the Fences (60) so they are parallel with each other, use a straight edge that is long enough to span the entire length of the two Fences (60). (See

Figure Q.)

2.If the Fences (60) are not parallel, place shims (not included) between the back of the Fence and the face of the Right or Left Fence Body

(57, 59). (See Figure Q.)

FENCE (60)

FENCE

(60)

STRAIGHT EDGE (NOT INCLUDED)

	FIGURE Q
SKU 95668	For technical questions, please call 1-800-444-3353	PAGE 14