SERVICE
1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Wood Shaper. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Wood Shaper.
3.Do not force the Wood Shaper. This tool will do the work better and safer at the speed and capacity for which it was designed.
4.WARNING! Keep hands and fingers away from the cutting area. Use a “push stick” (not included) when necessary.
5.Never leave the Wood Shaper unattended when it is plugged into an electrical outlet. Always unplug the unit from its electrical outlet before leaving.
6.Industrial applications must follow OSHA guidelines.
7.Never stand on the Wood Shaper. Serious injury could result if the unit is tipped.
8.Always unplug the Wood Shaper from its power supply source before performing any inspection, maintenance, or cleaning procedures.
9.Keep all guards in place and in proper working order.
10.Never place your hands within 12 inches of the Cutters. Never pass your hands directly over or in front of the Cutter. As one hand approaches the 12 inch radius point, move it in an arc motion away from the Cutter to the outfeed side and reposition that hand more than 12 inches beyond the Cutter.
11.Do not shape stock shorter than 12 inches without special fixtures or jigs
(not included). Where practical, shape longer stock and cut to size.
SKU 95668 | For technical questions, please call | PAGE 5 |
