squeezed. If a humming noise per- sists while the motor is on stand- by, briefly discharge the nozzle in a safe direction.
6.Point the Nozzle in a safe direction and squeeze the Trigger. Switch the unit’s switch to the OFF posi- tion whenever the gun is not in use. Clean the area, following the tips con- tained in the Operating Tips section.
7.When finished spraying turn the
Power Switch to its “OFF” position, and turn off the water supply.
WARNING: Do not disconnect the
8.IMPORTANT! When turning off the unit after use, high pressure will
remain inside the unit, its High Pres- sure Hose, and the water inlet hose. Point the Water Gun in a safe direc- tion and discharge all remaining pres- sure. The
9.Store the pressure washer and all ac- cessories according to the directions under Storage on page 16.
If any unexpected problems arise, please refer to the Troubleshooting section at the end of this manual.
SKU 99741 | For technical questions, please call | PAGE 13 | |
Troubleshooting section at end of manual. | |||
|
|