Troubleshooting (Continued)
Shut off the Pressure Washer, release all pressure in a safe manner, and disconnect it from power and water before adjusting, cleaning, or repairing the unit.
Problem: There is no water coming out of the spray gun when the pump is run- ning and trigger is depressed.
Cause: Hard water deposits (calcium) has built up inside the small orifices block- ing the water from entering the pump.
Solution: Unplug the unit, lay the unit face down, fill pump at the water inlet fitting with calcium remover (such as CLR) and allow at least 5 hrs for calcium deposit to break down.
REV 08h
If the steps above do not solve the problem or if the repairs involved are
too complex, contact a qualified technician.
SKU 99741 | For technical questions, please call | PAGE 23 |