Pressure washer use and care
1.Do not use the pressure washer if the switch does not turn it on and off. Any pressure washer that cannot be controlled with the switch is danger- ous and must be repaired.
2.Disconnect the plug from the power source before making any adjust- ments, changing accessories, or storing pressure washers. Such pre- ventive safety measures reduce the risk of starting the pressure washer accidentally.
3.Store idle pressure washers out of the reach of children and do not allow persons unfamiliar with the pressure washer or these instructions to oper- ate the pressure washer. Pressure washers are dangerous in the hands of untrained users.
4.Maintain pressure washers. Check for breakage of parts and any other condition that may affect the pres- sure washer’s operation. If damaged, have the pressure washer repaired before use. Many accidents are caused by poorly maintained pres- sure washers.
5.Use the pressure washer, acces- sories etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the pressure washer for operations different from those intended could result in a haz- ardous situation.
Service
Have your pressure washer serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the pres- sure washer is maintained.
Specific Pressure Washer Safety
Warnings
1.Maintain labels and nameplates on the equipment. These carry impor- tant safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Risk of injection or severe injury. Keep clear of Nozzle. Do not direct discharge stream at people or ani- mals. Keep the work area clear of all people and animals.
3.Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attach- ments. Do not use this product for a purpose for which it was not intend- ed.
4.This product must continuously run with cold water only. Never use hot water. Dry running will cause serious damage to the seals. Make sure the water supply used for the Pressure Washer is not dirty, sandy, and does not contain any corrosive chemical products.
5.To avoid electrical shock, never start and run the Pressure Washer in the rain. Never allow water to leak inside the Body of the Pressure Washer. Do not direct discharge stream at the Pressure Washer itself or at other live electrical equipment.
6.Do not allow the GFCI Plug to be- come wet. Always place the GFCI
SKU 99741 | For technical questions, please call | PAGE 5 | |
Troubleshooting section at end of manual. | |||
|
|
