Troubleshooting (Continued)
Shut off the Pressure Washer, release all pressure in a safe manner, and disconnect it from power and water before adjusting, cleaning, or repairing the unit.
Pressure changes during use
Air may be getting in the water supply hose, check all connections.
Connections
are loose
Retighten
connections.
Tip is dirty
Clean tip.
All connections
are tight
Check that tip is free from debris and deposits.
Tip is
clean
Internal valves or seals may be worn or sticking, contact a qualified technician.
Detergent will not dispense
Verify that proper type of pressure washer detergent is being used and that the low pressure setting is being used, see pages
washer detergent
used
Remove the Handle and thoroughly rinse out the detergent bottle and passages. Refill with correct detergent.
Incorrect
setting used
Set up the washer as explained on page 10.
Correct detergent
and settings
used
Remove the Handle and check that the suction tube is not bent or pinched.
If the steps above do not solve the problem or if the repairs involved are
too complex, contact a qualified technician.
SKU 99741 | For technical questions, please call | PAGE 22 |