Troubleshooting (Continued)
Shut off the Pressure Washer, release all pressure in a safe manner, and disconnect it from power and water before adjusting, cleaning, or repairing the unit.
Pressure Washer will not start
Dry self thoroughly and check the voltage at the outlet, and press the reset button on the GFCI power plug (explained under Controls and Features, #1 on page 10).
Power supply |
|
inadequate | Reset button not |
| set correctly |
Have a certified | Setup the GFCI plug |
electrician correct | as explained on |
the problem. | page 10. |
Power supply
adequate and reset button set properly
If the power switch is in the on position the Thermal safety Switch may be tripped. Switch the unit off and allow the unit to rest for
Pressure washer does not build pressure
Check that hose is unbent and Inlet Screen is free from debris and deposits.
Hose is kinked
or Screen is
clogged
Clean Screen and straighten hose. Switch to a shorter hose, if possible.
Hose is not kinked and
screen is clean
Air may be getting in the water supply hose, check all connections.
Connections | All connections |
are loose | are tight |
Retighten
connections.
Internal valves, seals, or the nozzle may be worn, contact a qualified technician.
If the steps above do not solve the problem or if the repairs involved are
too complex, contact a qualified technician.
SKU 99741 | For technical questions, please call | PAGE 21 |