CONNECTIONS
Audio Connections
There are two formats for audio connections: digital and analog. Digital audio signals are of higher quality, and are required for listening to sources encoded with digital surround modes, such as Dolby Digital and DTS. There are two types of digital audio connections: coaxial and optical. Either type of digital audio connection may be used for each source device, but never both simultaneously for the same source. However, it’s okay to make both analog and digital audio connections at the same time to the same source.
NOTE: Although HDMI cables are capable of carrying digital audio signals, the AVR 147 is not designed to process those signals. Therefore, if your source and video display are both HDMI- capable, use the HDMI connections for video only. Make a separate audio connection from the source device to the AVR 147, and turn the volume on your TV all the way off.
Digital Audio
Coaxial digital audio jacks are usually
Coaxial digitalCoaxial
audio cable Figure 4 – Coaxial Digital Audio
Optical digital audio connectors are normally covered by a shutter to protect them from dust. The shutter opens as the cable is inserted. Input connectors are
Analog audio | L |
| |
cable (RCA) | R |
Figure 6 – Analog Audio
Multichannel analog connections are used with some
See Figure 7.
Front Surround Center
Multichannel analog audio cable (RCA)
Subwoofer
Figure 7 – Multichannel Analog Audio
Harman Kardon receivers also include a proprietary, dedicated audio connection called “The Bridge/DMP”. If you own an iPod with a dock connector, you may purchase The Bridge separately and connect it to The Bridge/DMP port on the receiver. See Figure 8. Dock your iPod (not included) in The Bridge, and you may play your materials through your
Figure 8 – The Bridge
Video Connections
Optical digital audio cable
Optical
Although some sources produce an audio signal only (e.g., CD player, tape deck), many sources output both audio and video signals (e.g.,
Figure 5 – Optical Digital Audio
Due to the nature of digital signals as binary bits, they aren’t subject to signal degradation the way analog signals are. Therefore, the quality of coaxial and optical digital audio connections should be the same, although it is important to limit the length of the cable. Whichever type of connection you choose, Harman Kardon recommends that you always select the highest quality cables available within your budget.
Analog Audio
Analog connections require two cables, one for the left channel (white) and one for the right channel (red). These two cables are often attached to each other for most of their length. See Figure 6. Most sources that have digital audio jacks also have analog audio jacks, although some older types of sources, such as tape decks, have only analog jacks. For sources that are capable of both digital and analog audio, you may wish to make both connections. If you wish to record materials from DVDs or other
DVD player, cable television box, HDTV tuner, satellite box, VCR, DVR). In addition to the audio connection, you will need to connect one type of video connection for each of these sources (never more than one at the same time for any source).
Digital Video
The AVR 147 is equipped with two HDMI
There are different versions of HDMI, depending on the capability of the source device and the type of signal it is capable of transmitting via the HDMI connection.
In addition, receivers and processors such as the AVR 147 may handle the incoming signal in several different ways, depending on their capabil- ity as well. The AVR 147 is only capable of switching the HDMI data. That is, the incoming audio and video data will be passed directly to your
17