Manuals / Harman-Kardon / Home Audio / Stereo Receiver

Harman-Kardon AVR 147 owner manual Step Nine – Turn On the AVR, Installation

Models: AVR 147

1 68

Download 68 pages 55.01 Kb

Page 26

Step Nine – Turn On the AVR 147

INSTALLATION

Step Nine – Turn On the AVR 147

Two steps are required the first time you turn on the AVR 147.

1.Gently press the Master Power Switch until the word OFF is no longer visible. The Power Indicator above the two power switches should light up in amber, indicating that the AVR is in Standby mode and is ready to be turned on. See Figure 35. Normally, you may leave the Master Power Switch in the ON position, even when the receiver is not being used.

Figure 35 – Power Switches

2.There are several ways in which the AVR 147 may be turned on from Standby mode.

a)Press the Standby/On Switch on the front panel. See Figure 35.

b)Press the Source Select Button on the front panel. See Figure 36.

Figure 36 – Source Select Button

c)Using the remote, press any one of these buttons: AVR, DVD/CD, TAPE/The Bridge, HDMI 1/HDMI 2, VID1, VID2, VID3, XM, AM/FM or 6CH. See Figure 37.

Figure 37 – AVR and Input Selectors

NOTE: Any time you press one of the Input Selectors on

the remote (i.e., DVD/CD, TAPE/The Bridge, HDMI 1/HDMI 2, VID1, VID2 or VID3), the remote will switch modes so that it will only transmit the codes programmed to operate that device. In order to control the receiver, you will need to press the AVR button to return the remote to AVR mode.

26

Image 26

Harman-Kardon AVR 147 owner manual Step Nine – Turn On the AVR, Installation

Contents

Designed to Entertain.TM AUDIO/VIDEO RECEIVER OWNER’S MANUAL9.A Product and Cart Combination SAFETY INFORMATIONindicates a need for service on the productUnpacking SAFETY INFORMATIONImportant Safety Information Handle the AC Power Cord GentlySTAPLE INVOICE HERE Modèle pour les Canadien TABLE OF CONTENTSFor Canadian model AVR 147 5.1-ChannelAudio/Video Receiver INTRODUCTIONThank you for choosing Harman Kardon Audio SectionAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsFRONT-PANELCONTROLS Message Display REAR-PANELCONNECTIONS Video REMOTE CONTROL FUNCTIONS Tuning Tone Mode Night Mode Track Skip Power OnDigital Input Tuning Mode Direct Station Entry Mute Power Off Input SelectorsREMOTE CONTROL FUNCTIONS DSP Surround: Press this button to select a DSP surround mode Hall 1, Hall 2, TheaterTypical Home Theater System INTRODUCTION TO HOME THEATERSurround Modes Multichannel AudioTypes of Connections Connecting Source Devices to the AVRCONNECTIONS Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioRS-232Serial Port AntennasAnalog Video CONNECTIONSSubwoofer SPEAKER PLACEMENTVideo Display Front LeftStep Two – Connect the Subwoofer INSTALLATIONStep One – Connect the Speakers Step Three – Connect the AntennasVideo 1 Source INSTALLATIONHDMI 1 Source Video 2 SourceVideo 3 Source INSTALLATIONHDMI 2 Source TheBridgeTMStep Five – Connect the Video Display TapeStep Eight - Program Sources Into the Remote Step Six – Plug in AC PowerStep Seven – Insert Batteries in Remote INSTALLATION4.Enter a code from Step 1 above INSTALLATION2.Turn on your source device Step Nine – Turn On the AVR INSTALLATIONConfigure the AVR 147 Using EzSet/EQ INITIAL SETUPUsing the On-ScreenMenu System INITIAL SETUP Figure 40 – Plug EzSet/EQ microphone into receiverWhat EzSet/EQ Does INITIAL SETUPConfigure Sources INITIAL SETUP›Button selects the sources in the reverse order INITIAL SETUPthe tuner at this time audio input assigned to the sourceINITIAL SETUP Figure 54 – DMP Setting Menu ScreenOPERATION Sleep TimerVolume Control Turning On the AVRTone Controls HeadphonesMute Function Source Selection6-ChannelDirect Inputs Audio Input SelectionVideo Input Selection OPERATIONFigure 70 – Tuning Mode Using the TunerFigure 69 – Tuning a Station OPERATIONOPERATION XM Radio OperationRecording NOTES Using TheBridgeTMOPERATION NOTES ON VIDEO PLAYBACKSelecting a Surround Mode OPERATIONADVANCED FUNCTIONS Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundSurround Modes Dolby Surround SettingsADVANCED FUNCTIONS mode has been selected. See FigureADVANCED FUNCTIONS Table 6 – Surround ModesSurround Mode ADVANCED FUNCTIONSTable 6 – Surround Modes Table 6 – Surround Modes Continued ADVANCED FUNCTIONSStep Two - Measure Speaker Distances Manual SetupStep Three – Manual Setup Menu Step One – Determine Speaker SizeADVANCED FUNCTIONS Speaker Size Menuthe LARGE setting ADVANCED FUNCTIONS Delay Adjust MenuSpeaker Crossover Menu A. Using the Remote Control With the Test Tone ADVANCED FUNCTIONSADVANCED FUNCTIONS System SettingsC. Using the Full-OSDMenu Punch-ThroughProgramming Advanced Remote Control FunctionsDim Function ADVANCED FUNCTIONSADVANCED FUNCTIONS Resetting the RemoteMacros ADVANCED FUNCTIONS Processor ResetMemory TROUBLESHOOTING GUIDE AVR 147 TECHNICAL SPECIFICATIONS Table A3 – Delay Setting Defaults Table A1 – Source Input Setting DefaultsTable A2 – Speaker/Channel Setting Defaults APPENDIXAPPENDIX Table A4 - Source Input SettingTable A5 – Speaker/Channel Setting APPENDIX Table A6 - Remote Control CodesTable A7 – System Settings APPENDIX Table A8 – Remote Control Function ListAPPENDIX Table A8 – Remote Control Function List continuedAPPENDIX Table A9 – Remote Control Product Codes – TV APPENDIXTable A10 – Remote Control Product Codes – VCR Table A9 – continuedTable A10 - continued APPENDIXAPPENDIX Table A11 – Remote Control Product Codes – CDTable A12 – Remote Control Product Codes – DVD Table A15 – Remote Control Product Codes – CBL Table A13 – Remote Control Product Codes – SATTable A14 – Remote Control Product Codes – TAPE APPENDIXAPPENDIX Table A16 – Remote Control Product Codes –Table A15 – continued THE BRIDGE/DMPPage NOTES