Manuals / Harman-Kardon / Home Audio / Stereo Receiver

Harman-Kardon AVR 147 owner manual Processor Reset, Memory, Advanced Functions

Models: AVR 147

1 68

Download 68 pages 55.01 Kb

Page 52

Processor Reset

ADVANCED FUNCTIONS

Processor Reset

There may be instances when you wish to fully reset the AVR 147 to its factory defaults, or the unit may behave erratically after a power surge.

To correct erratic behavior, first try turning the Master Power Switch off and unplugging the AC Power Cord for at least 3 minutes. Plug the cord back in and turn the receiver back on. If this doesn’t help, try a system reset.

NOTES:

•A system reset erases all user configurations, including speaker and level settings and tuner presets. After a reset, you will need to re-enter all of these settings.

•The RS-232 Reset Button on the rear panel of the AVR 147 does not perform a system reset. DO NOT press the RS-232 Reset Button.

To reset the AVR 147, place the receiver in Standby mode (press the front-panel Standby/On Switch so that the Power Indicator turns amber). Then press and hold the front-panel Tone Mode Button for at least 5 seconds until the RESET message appears in the display.

If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Service centers may be located by visiting our Web site at www.harmankardon.com.

Memory

If the AVR 147 is unplugged or experiences a power outage, it will retain user settings for up to four weeks.

52

Image 52

Harman-Kardon AVR 147 owner manual Processor Reset, Memory, Advanced Functions

Contents

Designed to Entertain.TM AUDIO/VIDEO RECEIVER OWNER’S MANUALSAFETY INFORMATION indicates a need for service9.A Product and Cart Combination on the productSAFETY INFORMATION Important Safety InformationUnpacking Handle the AC Power Cord GentlySTAPLE INVOICE HERE For Canadian model TABLE OF CONTENTSModèle pour les Canadien INTRODUCTION Thank you for choosing Harman KardonAVR 147 5.1-ChannelAudio/Video Receiver Audio SectionSupplied Accessories Audio InputsAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANELCONTROLS Message Display REAR-PANELCONNECTIONS Video REMOTE CONTROL FUNCTIONS Power On Digital Input Tuning Mode Direct Station EntryTuning Tone Mode Night Mode Track Skip Mute Power Off Input SelectorsREMOTE CONTROL FUNCTIONS DSP Surround: Press this button to select a DSP surround mode Hall 1, Hall 2, TheaterINTRODUCTION TO HOME THEATER Surround ModesTypical Home Theater System Multichannel AudioConnecting Source Devices to the AVR CONNECTIONSTypes of Connections Speaker ConnectionsAudio Connections Digital AudioVideo Connections Analog AudioAntennas Analog VideoRS-232Serial Port CONNECTIONSSPEAKER PLACEMENT Video DisplaySubwoofer Front LeftINSTALLATION Step One – Connect the SpeakersStep Two – Connect the Subwoofer Step Three – Connect the AntennasVideo 1 Source INSTALLATIONVideo 2 Source Video 3 SourceHDMI 1 Source INSTALLATIONTheBridgeTM Step Five – Connect the Video DisplayHDMI 2 Source TapeStep Six – Plug in AC Power Step Seven – Insert Batteries in RemoteStep Eight - Program Sources Into the Remote INSTALLATION2.Turn on your source device INSTALLATION4.Enter a code from Step 1 above Step Nine – Turn On the AVR INSTALLATIONUsing the On-ScreenMenu System INITIAL SETUPConfigure the AVR 147 Using EzSet/EQ INITIAL SETUP Figure 40 – Plug EzSet/EQ microphone into receiverWhat EzSet/EQ Does INITIAL SETUPConfigure Sources INITIAL SETUPINITIAL SETUP the tuner at this time›Button selects the sources in the reverse order audio input assigned to the sourceINITIAL SETUP Figure 54 – DMP Setting Menu ScreenSleep Timer Volume ControlOPERATION Turning On the AVRHeadphones Mute FunctionTone Controls Source SelectionAudio Input Selection Video Input Selection6-ChannelDirect Inputs OPERATIONUsing the Tuner Figure 69 – Tuning a StationFigure 70 – Tuning Mode OPERATIONRecording XM Radio OperationOPERATION Using TheBridgeTM OPERATIONNOTES NOTES ON VIDEO PLAYBACKSelecting a Surround Mode OPERATIONAnalog Audio Signals Digital Audio SignalsADVANCED FUNCTIONS Audio Processing and Surround SoundDolby Surround Settings ADVANCED FUNCTIONSSurround Modes mode has been selected. See FigureADVANCED FUNCTIONS Table 6 – Surround ModesTable 6 – Surround Modes ADVANCED FUNCTIONSSurround Mode Table 6 – Surround Modes Continued ADVANCED FUNCTIONSManual Setup Step Three – Manual Setup MenuStep Two - Measure Speaker Distances Step One – Determine Speaker Sizethe LARGE setting Speaker Size MenuADVANCED FUNCTIONS Speaker Crossover Menu Delay Adjust MenuADVANCED FUNCTIONS A. Using the Remote Control With the Test Tone ADVANCED FUNCTIONSC. Using the Full-OSDMenu System SettingsADVANCED FUNCTIONS Advanced Remote Control Functions Dim FunctionPunch-ThroughProgramming ADVANCED FUNCTIONSMacros Resetting the RemoteADVANCED FUNCTIONS Memory Processor ResetADVANCED FUNCTIONS TROUBLESHOOTING GUIDE AVR 147 TECHNICAL SPECIFICATIONS Table A1 – Source Input Setting Defaults Table A2 - Speaker/Channel Setting DefaultsTable A3 – Delay Setting Defaults APPENDIXTable A5 – Speaker/Channel Setting Table A4 - Source Input SettingAPPENDIX Table A7 – System Settings Table A6 - Remote Control CodesAPPENDIX APPENDIX APPENDIX Remote Control Function ListTable A8 – APPENDIX Remote Control Function List continuedTable A8 – Table A9 – Remote Control Product Codes – TV APPENDIXTable A9 – continued Table A10 - continuedTable A10 – Remote Control Product Codes – VCR APPENDIXTable A12 – Remote Control Product Codes – DVD Table A11 – Remote Control Product Codes – CDAPPENDIX Table A13 – Remote Control Product Codes – SAT Table A14 - Remote Control Product Codes - TAPETable A15 – Remote Control Product Codes – CBL APPENDIXTable A16 – Remote Control Product Codes – Table A15 – continuedAPPENDIX THE BRIDGE/DMPPage NOTES