Hasselblad 848 guide

10.Re-mount the Feeder on your scanner and then turn on the scanner.

29

9.The scanner now shuts down and the Align Feeder window updates with new instructions.

Remove the Feeder and use the adjustment tool to re-tighten the self- locking nut on the rear of the Feeder (see also Figure 8, above).

10.Re-mount the Feeder on your scanner and then turn on the scanner.

11.When the scanner comes online, click on Continue in the Align Feeder window.

12.The Align Feeder window updates to tell you that the procedure is complete.

Click on Done to close the Align Feeder window.

Image 29

Hasselblad 848 manual Re-mount the Feeder on your scanner and then turn on the scanner

Contents

Batch Feeder for Flextight 848 and 949 Scanners by HasselbladUser’s Guide Page Table of Contents General IntroductionImportant Warnings and Restrictions When Operating the Feeder System RequirementsFor All Users For Macintosh Users B F G H Batch Feeder DiagramA C D E Figure 2 Location of the shipping screws on the Feeder back panel Preparing the Feeder for First Use or after Shipping Mounting the Batch Feeder Mounting and Unmounting the Batch Feeder Click on the Continue button 5. The Feeder window opens Click on the Mount buttonPage Click on Done to close the Mount feeder window 11. Turn on the scanner by pressing its on/off switch Unmounting the Batch Feeder 7. Click on Done to close the Feeder window Loading Originals into the Feeder Page Batch Scanning with 3f Scanning with the Batch FeederPage Page Custom Setups and Single Scans Page Page Troubleshooting Aligning the Feeder Adjusting the Feeder Angle Figure 6 Adjusting the Feeder angle Figure 7 Bolts for adjusting the feeder angle Adjusting the Loading Position Figure 8 Unlocking/locking the Feeder position NOTE! Do not touch similar looking nuts to the left You have already loosened the nut, so just click on Continue Figure 10 Adjusting the Feeder position Figure 9 Using the adjustment tool 10. Re-mount the Feeder on your scanner and then turn on the scanner Click on Done to close the Feeder window 13. You now return to the Feeder window Shipping the Feeder Preparing the Feeder for Storage or ShippingStoring the Feeder 4. Get the original box and lay down on the floor or on a table Disposal Preventive Maintenance Technical Information Specifications CE Declaration