Healthrider HRTL19913 manual Assembly requires two people

ASSEMBLY

Assembly requires two people.	Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is assembled.		No tools are required.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person,carefully raise the

Uprights (65) until the Wheels (77) are resting on the floor as shown.

1

65

77

2.Remove the Lock Knob (67) from the Lock Pin (72). Make sure that the Lock Pin Collar (70) and the Spring (69) are on the Lock Pin. (Note: If there are two Lock Pin Collars, there should be one on each side of the Spring.) Insert

the Lock Pin through the Left Foam Grip (62), and tighten the Lock Knob onto it.

After assembly has been completed, pull on the Left

Foam Grip (62) in the direction shown until the Latch Pin (72) slides freely.

2

67

62

70

72

69

3.Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill

to protect the floor or carpet.For your benefit, we recommend that you familiarize yourself with the TROU- BLESHOOTING AND MAINTENANCE section on pages 25 and 26.

6