ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver 
, wire cutters 
, and rubber mallet 
.
Note: The underside of the treadmill walking belt is coated with
To identify small parts during assembly, use the part identification drawings below.
3/4” Tek Screw | 1” Tek Screw | 1 1/4” Tek Screw |
Nut |
|
|
Foot Screw | Wheel Bolt | |
Handrail Star |
|
|
Washer |
|
|
Console Bolt |
| |
1.With the help of a second person, carefully raise the Uprights (69) to the position shown.
Next, insert one of the Extension Legs (102) into the base of the Uprights (69) as shown. Make sure that the
Extension Leg is turned so the Base Pad (99) is un- derneath it. Note: It may be helpful to tip the Uprights for- ward and use a rubber mallet to fully insert the Extension Leg.
Insert the other Extension Leg (not shown) in the same way.
1 |
69 |
102 |
99 |
6
