Healthrider HRTL99510.0 manual Be careful not to pinch the Upright, into place yet

4.	Hold the Left Upright (88) against the Base	4
	(91). Be careful not to pinch the Upright
	Wire (77) or the Ground Wire (90). Insert two
	3/8" x 2 3/4" Patch Bolts (7) and two 3/8" x
	1 1/4" Patch Bolts (8) with two 3/8" Star					88
	Washers (13) into the Left Upright.
	Partially tighten the 3/8" x 2 3/4" Patch Bolts (7)
	and the 3/8" x 1 1/4" Patch Bolts (8) until the
	heads of the Patch Bolts touch the Left Upright
	(88); do not fully tighten the Patch Bolts yet.
	Attach the Right Upright (not shown) in the
	same way. Note: There are no wires on the
	right side.				7
		8	13
		77, 90		8	13	91
5. Identify the Left and Right Base Covers (83, 84).		5	77
	Slide the Left Base Cover onto the Left Upright
	(88). Slide the Right Base Cover onto the Right
	Upright (89). Do not press the Base Covers					89
	into place yet.
	Remove the wire tie from the Upright Wire (77).	Wire				88
						84
		Tie
			83
		8