Manuals / Healthrider / Fitness & Sports / Treadmill

Healthrider HRTL99510.0 manual Then, press the Incline increase button once

Models: HRTL99510.0

1 36

Download 36 pages 29.19 Kb

Page 13

Then, press the Incline increase button once.

14.Firmly tighten the two 5/16" x 1 1/2" Patch Bolts (15).

Then, firmly tighten the sixteen Patch Bolts (5, 7, 8, 14) (only one side is shown).

Press the Right and Left Base Covers (84, not shown) onto the Base (91) until they snap into place.

15.IMPORTANT: See page 15 and plug in the power cord. Next, see page 17 and turn on the power.

Then, press the Incline increase button once.

When the frame stops moving, remove the key from the console and unplug the power cord.

14
		15
		5
91	14	7
	14	84 8
		84 8

15	IMPORTANT:
	Make sure to follow

all instructions in

this step

13

Image 13

Healthrider HRTL99510.0 manual Then, press the Incline increase button once

Contents

1CALL-888TOLL-922-FREE-4222 QUESTIONS?USERʼS MANUAL WARNING DECAL PLACEMENT TABLE OF CONTENTSHEALTHRIDER is a registered trademark of ICON IP, Inc IMPORTANT PRECAUTIONS INSTRUCTIONS SAVE THESEBEFORE YOU BEGIN adjustable ASSEMBLYwrench scissorsSee the inset drawing. Tie the wire tie in the Make sure that the power cord is unpluggedAttach the Right Wheel Cap not shown to the right side of the Base 91 in the same91. Be careful not to pinch the Upright Wire 77 or the Ground Wire 90. Insert two88 do not fully tighten the Patch Bolts yet Attach the Right Upright not shown in thePage Bolts, and then tighten each of them Assembly10. With the help of a second person, hold the Pulse Bar Top 86 near the Pulse Bar Bottom 87. Insert the pulse wire from the Pulse Bar Top into the hole in the top of the Pulse Bar Bottom and pull it out of the hole in the Pulse Bar Bottom the pulse wires the console assembly. Be careful not to pinch12. With the help of a second person, hold the do not tighten the Patch Bolts yetThen, press the Incline increase button once Have a second person hold the Frame until this step is completed OPERATION AND ADJUSTMENT CONSOLE DIAGRAM HOW TO TURN ON THE POWER 5. Follow your progress with the displays 6. Measure your heart rate if desired 8. When you are finished exercising, remove the key from the consolerate, stand onContacts the foot rails 7. Turn on the fan if desired2. Select an onboard workout HOW TO USE AN ONBOARD WORKOUT 1. Insert the key into the console3. Start the workout 4. Follow your progress with the displays THE COOL DOWN MODE 9. When you are finished exercising, remove the key from the console5. Start the workout. See step 3 on page 6. Follow your progress with the displays. See step 5 on pageTHE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM HOW TO FOLD AND MOVE THE TREADMILL SYMPTOM The power turns off during use TROUBLESHOOTINGSYMPTOM The displays of the console do not function properly SYMPTOM The walking belt slows when walked on SYMPTOM The incline of the treadmill does not change correctlyTop View SYMPTOM The walking belt is off-center or slips when walked on EXERCISE INTENSITY EXERCISE GUIDELINESWORKOUT GUIDELINES EXERCISE FREQUENCYKey No. Qty PART LISTDescription Key No. QtyDescription DescriptionModel No. HRTL99510.0 R0211A EXPLODED DRAWING AModel No. HRTL99510.0 R0211A EXPLODED DRAWING BModel No. HRTL99510.0 R0211A EXPLODED DRAWING C8137 Model No. HRTL99510.0 R0211A EXPLODED DRAWING DLIMITED WARRANTY ORDERING REPLACEMENT PARTSICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT