Healthrider HRTL99510.0 manual

10.With the help of a second person, hold the Pulse Bar Top (86) near the Pulse Bar Bottom (87). Insert the pulse wire from the Pulse Bar Top into the hole in the top of the Pulse Bar Bottom and pull it out of the hole in the Pulse Bar Bottom.

Attach the Pulse Bar Top (86) to the Pulse Bar Bottom (87) with two #8 x 3/4" Screws (2) and six #8 x 1/2" Screws (1) in the locations shown.

Be careful not to pinch the pulse wire. Start all eight Screws, and then tighten each of them.

11.With the help of a second person, hold the Left and Right Handrails (81, 82) near the Base (91). Slide the lower ends of the Handrails into the holes on the top of the Right and Left Base Covers (84, not shown).

10			86
	87	1	1 Pulse	1
2 1			Wire
				1
				21
11				81
82
84			91

11