Hearth & Home Technologies • BV4236DBI, BV4842DBI • 2209-900 Rev. N • 9/1240
Log#3(SRV2209-703): Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1.
After slot and tab have been tted together, mate the groove located on the bottom of Log #3 with the horizontal grate bar
and slide Log # 3 toward the right until it rests against the far right grate tine (see Figure 7).
Log#4(SRV2164-704): Place Log #4 in the left log indentation on the burner top (see Figure 2). Slide Log # 4 from right
to left under Log #2 to t completely and securely into the indentation (see Figure 8). Nose of log #4 should be pulled to t
securely against right hand side of log indentation.
Log#5(SRV2209-705): Place Log #5 in the right log indentation on the burner top (see Figure 2). Ensure the log ts
completely and securely in the recessed indentation (see Figure 9). Log #5 should be pulled to the left hand side of log
indentation.
Log#6(SRV2209-706): Mate the groove located on the lower end of Log #6 with the fourth grate tine (from left to right)
as shown in Figure 10. Set the other end of Log #6 on the at area located on top of Log #4 (see Figure 9). Log #6 will
also rest against center grate tine. When properly installed, Log #6 will rest securely on all 3 contact points, not allowing
movement or shifting.
2209-935A
23
1
RIGHTGRATETINE
1
23
4
LOGNOSE
Figure7 Figure8
Figure10
11
2
23
3
455
6
FLATAREA
LOGCONTACTSGRATETINES
4
LOG#6CONTACTSTOPOFLOG#4
Figure9