K. After Fireplace is Lit
Initial
•The fireplace should be run three to four hours continuously on high.
•Turn the fireplace off and allow it to completely cool.
•Remove fixed glass assembly. See Section 14.K.
•Clean fixed glass assembly. See Section 3.
•Replace the fixed glass assembly and run continuously on high an additional 12 hours.
This cures the materials used to manufacture the fire- place.
NOTICE! Open windows for air circulation during fireplace
•Some people may be sensitive to smoke and odors.
•Smoke detectors may activate.
L.Frequently Asked Questions
ISSUE | SOLUTIONS | |
Condensation on the glass | This is a result of gas combustion and temperature variations. As the appliance warms, this | |
condensation will disappear. | ||
| ||
|
| |
Blue flames | This is a result of normal operation and the flames will begin to yellow as the appliance is allowed | |
to burn for 20 to 40 minutes. | ||
| ||
|
| |
| When first operated, this appliance may release an odor for the first several hours. This is caused | |
Odor from appliance | by the curing of materials from manufacturing. Odor may also be released from finishing materials | |
and adhesives used near the appliance. These circumstances may require additional curing | ||
| related to the installation environment. | |
|
| |
| This is a normal result of the curing process of the paint and logs. Glass should be cleaned within | |
Film on the glass | 3 to 4 hours of initial burning. A | |
| necessary. See your dealer. | |
|
| |
| Noise is caused by metal expanding and contracting as it heats up and cools down, similar to the | |
Metallic noise | sound produced by a furnace or heating duct. This noise does not affect the operation or longevity | |
| of the appliance. | |
Is it normal to see the pilot | In an Intellifire ignition system it is normal to see the pilot flame, but it should turn off when ON/ | |
flame burn continually? | OFF is turned to OFF. In a standing pilot system the pilot will always stay on. |
Heatilator • Caliber CD Series • | 13 |
