• Remove four screws holding outer collar to appliance | • Remove four screws holding outer cover plate to |
top. See Figure 9.5. Remove outer collar. | appliance back. See Figure 9.8. Remove outer cover. |
Figure 9.5 Outer Collar, Remove Four Screws
•Remove four screws holding inner collar to appliance top. See Figure 9.6. Remove inner collar.
Figure 9.6 Remove Four Inner Collar Screws
•Remove four screws holding outer shell cover. See Figure 9.7. Remove outer shell cover and set aside.
Figure 9.7 Outer Shell Cover
Figure 9.8 Outer Cover, Rear - Remove Plate
•Remove four screws holding inner cover plate to appliance back. See Figure 9.9. Remove inner cover.
Figure 9.9 Remove Inner Cover Plate
•Place inner collar on appliance back and replace four screws to hold this collar in place. See Figure 9.10. Make sure insulation is attached to the collar base!
Figure 9.10 Place inner collar on Rear of Appliance
Heatilator • Caliber Mesh CD | 37 |
