•Locate heat shield cover plate removed in the first step. Place the heat shield cover plate on top of heat shield. Replace four screws to hold this plate in place. See Figure 9.16.
Figure 9.16 Cover Plate-Replace
•Locate outer shell cover removed in the sixth step (Figure 9.7). Place the cover on top of appliance. See Figure 9.17. Replace four screws to hold plate in place. See Figure 9.18.
Figure 9.17 Place Cover Plate on Top of Appliance
Figure 9.18 Screw Cover into Place
•The appliance should look like the one shown in Figure 9.19 after it has been converted to a rear vent appliance.
Figure 9.19 Completed Conversion
Heatilator • Caliber Mesh CD | 39 |
