Hearth and Home Technologies CD4236MILR, CD4842MR, CD4842MIR, CD4842MLR, CD4842MILR Appliance Setup

14 Appliance Setup

A. Remove Clean Face Components B. Remove Glass Assembly

See Section 14.K.

C. Remove the Shipping Materials

Remove shipping materials from inside or underneath the firebox.

D. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.

E. Accessories

Install approved accessories per instructions included with accessories. Contact your dealer for a list of ap- proved accessories.

WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazard and will void the warranty.

F. Install the Refractory

A weathered brick refractory is available as an optional accessory. Install the WTBC36D in the CD4236 Series appliances and the WTBC42D in the CD4842 Series ap- pliances. Follow the installation instructions provided with the specific accessory part.

G. Place the Lava Rock

•See diagram, Figure 14.1.

H. Place the Vermiculite

•Sprinkle vermiculite over lava rock. See diagram, Figure 14.1.

I. Place the Rockwool

WARNING! Risk of Explosion! Follow rockwool placement instructions. DO NOT place rockwool directly over burner ports. Replace rockwool material annually. Improperly placed rockwool interferes with proper burner operation.

•Rockwool is shipped with this gas appliance.

•Place a small amount of 1/2 in. diameter pieces (dime0- size) rockwool on the burner pan so that rockwool touches but does not cover the holes in the burner pan.

Vermiculite and	Rock wool	Vermiculite and
lava rock	placement	lava rock
placement on	(shaded areas)	placement on
sides and front		sides and front
of hearth pan.		of hearth pan.
Figure 14.1 Placement of Rockwool, Lava Rock, Vermiculite

54 Heatilator • Caliber Mesh CD Series-SIT Valve • 4040-849 Rev J • 06/08