![](/images/new-backgrounds/1056859/5685967x1.webp)
CYLINDER
STOP
Figure 12.4 The top of the glass assembly should come in contact with the cylinder stops.
F. Remote Control Service
The
REMOTE
Figure 12.7
Figure 12.5 Hold the top of the assembly back against the stops while raising the platform as shown.
Figure 12.6 Continue until all four screws have been bottomed out and the glass cylinder is in place. Reverse these steps to remove the assembly.
FRONT
COVER PANEL
Figure 12.8 Position the front cover panel as shown. Now install the door.
34 | Heat & Glo • |