![](/images/new-backgrounds/1056859/5685913x1.webp)
3 Framing and Clearances
Note:
•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
A.Selecting Appliance Location
When selecting a location for your appliance it is important to consider the required clearances to walls (see figure 3.1).
WARNING
Fire Risk
Provide adequate clearance:
•Around air openings
•To combustibles
• For service access
Locate appliance away from traffic areas.
Note: For actual appliance dimensions refer to Sec- tion 16.
1/2 IN.
A
B
C
E
E
In addition to these framing dimensions, also reference the following sections:
•Clearances and Mantel Projections (Sections 3.C and 3.D)
•Vent Clearances and Framing (Section 6).
B
B
1/2 IN.
D
A
Model | A | B | C | D | E | ||
Cyclone | Inches | 44 | 12 | ||||
|
|
|
|
|
| ||
Millimeters | 791 | 728 | 1118 | 416 | 305 | ||
| |||||||
|
|
|
|
|
|
|
Figure 3.1 Appliance Locations
Heat & Glo • | 7 |