Hearth and Home Technologies DV3732SBIL manual Exhaust restrictor Instructions

2. Top Vent - Vertical Termination

Top Vent - Vertical Termination

No Elbows

V1 = 60 ft. Max. (18.3 m)

Note: If installing a vertical vent/termination off the top of the appliance, the optional vertical termination baffle may be needed.

Note: Use SLP Series

components only.

CAP

V1

Figure 7.7

Exhaust restrictors are recommended for these verti- cally terminated products which have excessive draft. Exhaust restrictors will compensate for high draft, and restore visual flame height. If the vent configuration has a total vertical of 15-60 feet, an exhaust restrictor may be needed. The exhaust restrictor can be located in the appliance manual bag.

Exhaust restrictor Instructions

1.Install the exhaust restrictor over the center of the ex- haust outlet in the firebox (see Figure 7.8).

2.Center the exhaust restrictor in the open end of the exhaust outlet and secure through the slots on the ex- haust restrictor with the 2-1/4 in. self tapping screws provided in the appliance manual bag.

EXHAUST BAFFLE

To access the exhaust openings, remove the ex- haust baffle. To remove exhaust baffle, remove the two wing nuts.

Top Vent Application

Exhaust restrictor

Rear Vent Application

Exhaust restrictor

Note: Be sure to rein- stall the exhaust baffle after exhaust restrictor installation.

Figure 7.8

Hearth & Home Technologies • DV3732SBI, DV3732SBIL • 2215-900 Rev. F • 9/12 27