Hearth and Home Technologies DV3732SBIL manual Doors, Template

D. Doors

Only doors certified for use with this appliance model may be used. Contact your dealer for a list of doors that may be used. Once you have determined what kind of door and finishing material is going to be used on the fireplace, you may use the table below which shows the door mod- els and the finishing material thickness allowed. For an inside fit there is an available template to assist with siz- ing the finishing material.

UNITS AND

DV3732SBI, DV3732SBIL (550-Template)

TEMPLATE PART #

DOOR

FIT

FINISH MATERIAL

SEE

X

Y

THICKNESS

FIGURE

Aero-32

Inside

4 inches Max.

13.17

N/A

N/A

Chad-32E

Overlap

1 inch Max.

13.18

N/A

N/A

Chad-32E

Inside

1-4 inches

13.19

32-3/8 in.

30-3/8 in.

Halston-32E

Overlap

1 inch Max.

13.18

N/A

N/A

Halston-32E

Inside

1-4 inches

13.20

32-3/8 in.

30-3/8 in.

FINISHING MATERIAL	DOOR	FINISHING MATERIAL
4 IN. MAXIMUM THICKNESS		4 IN. MAXIMUM THICKNESS

Stop finishing material flush with fireplace surround opening.

Figure 13.17 Aero Door

	FRONT FACE OF FIREPLACE
DOOR	1 in. MAX
	FINISHING MATERIAL
	(TOP EDGE)

Finishing materials 1 inch maximum thick.

Stop finishing material flush with opening.

Figure 13.18 Overlap Fit Door (Chad and Halston)

FINISHING MATERIAL	FINISHING MATERIAL
4 IN. MAXIMUM
	4 IN. MAXIMUM
THICKNESS
	THICKNESS

DOOR

Y

X

(Includes 1/8 in. opening each side of door)

Finishing material between 1 and 4 inches thick.

Refer to Table 1 for X and Y dimensions.

Figure 13.19 Inside Fit Door (Chad)

FINISHING	FINISHING
MATERIAL	MATERIAL

*IF FINISHING MATERIAL IS THICKER THAN

2 IN., DOORS WILL ONLY OPEN

AS FAR AS PICTURED

DOORS

Y

X

(Includes 1/8 in. opening each side of door)

Finishing material between 1 and 4 inches thick.

Refer to Table 1 for X and Y dimensions.

Figure 13.20 Operable Hinge Door (Halston)

Hearth & Home Technologies • DV3732SBI, DV3732SBIL • 2215-900 Rev. F • 9/12 57