1. Bend tab to open.
Bottom Flange
Figure 7.2 Prepare Junction Box Bracket
2.Slide the flange of the junction box through the slot in the bracket.
Figure 7.3 Position Bracket on Junction Box
This tab should be bent back under the flange to help secure the bracket to the junction box.
Figure 7.4 Secure Bracket to Junction Box
Note: Do NOT wire 110
VAC to wall switch.
Figure 7.5 Attach the Heat Shield
Figure 7.6 Attach the Junction Box
C. Installation of Fan
Follow installation instructions supplied with fan kit.
CAUTION
Shock Risk
•Do NOT remove grounding prong from plug.
•Plug directly into properly grounded three- prong receptacle.
•Route cord away from appliance.
•Do NOT route cord under or in front of appliance.
Heat & Glo • | 25 |
