Santa Fe Pellet Stove

R

B. Through The Wall

Horizontal termination cap must be a minimum of 12 inches. (305mm) from the wall. Approved for mobile home instal- lations. Must use 3 or 4 inch (76-102mm) “L” or “PL” listed pellet venting or listed double wall pipe and a Quadra-Fire Outside Air Kit in mobile homes.

NOTE:

In Canada, where passage through a wall or partition of combustible construction is desired, the installation shall conform to CAN/CSA-B365

Straight Out

6 in.

(152mm) Minimum From Glass

2in.

(51mm)

Minimum

Horizontal

Wall Termination

Thimble Cap

12 in.

(305mm) Minimum

Non-combustible Hearth Pad

Figure 13.1

45 Degree

Illustration shows venting going in both directions. Choose which one is best for your installation.

12 in. (305mm)

Minimum

Wall

Thimble

12in.

(305mm) Minimum

2 in. (51mm) Minimum

2in.

(51mm) Minimum

Figure 13.2

September 1, 2008

7001-142D

Page 13

Page 13
Image 13
Hearth and Home Technologies SANTAFE-B1 owner manual Straight Out, Degree, Santa Fe Pellet Stove Through The Wall