4 | Getting Started | Installer Guide |
| ||
|
|
A. Typical Appliance System
NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual
HORIZONTAL
TERMINATION CAP (SECTION 8.A)
MAINTAINS MINIMUM CLEARANCE
AROUND PIPE (SECTION 10.F)
FRAMING/HEADER (SECTION 5.B)
VERTICAL TERMINATION CAP (SECTION 10.I)
STORM COLLAR (SECTION 10.C)
VENT PIPE PENETRATES ROOF PREFERABLY WITHOUT AFFECTING ROOF RAFTERS (SECTION 8.C )
ATTIC INSULATION SHIELD (NOT SHOWN) MUST BE USED HERE TO KEEP INSULATION AWAY FROM VENT PIPE IF ATTIC IS INSULATED (SECTION 8.D )
VENT PIPE (SECTION 8 and 10)
FRAMING HEADED OFF IN CEILING JOISTS (SECTION 8.C)
CEILING FIRESTOP ON FLOOR OF ATTIC (SECTION 8.C)
GAS LINE 
(SECTION 11.C)
OPTIONAL
WALL SWITCH
Figure 4.1 Typical System
16 | Heat & Glo • |
